The PipeMac featured on the cover and in an extended article in The Clancy Group ‘Imagine’ magazine

The PipeMac featured on the cover and in an extended article in The Clancy Group ‘Imagine’ magazine

In February 2021, PipeMac Technologies Ltd delivered The PipeMac X30 system to Chesterton Farm in Cirencester to The Clancy Group who were working to install 3.8 kilometres of gravity sewer for Thames Water. 

This was our Mark 1 kit put to work laying DN600 and DN900 concrete pipes at depths varying from 1.4m to 5.0m. The system demonstrated its health and safety credentials from day 1 – in the words of Clancy’ Project Manager James Maguire “The PipeMac system totally removes the need for a person in the trench, which is a huge win for us in terms of health and safety on site”.

The Clancy team together with Thames Water engineers were particularly impressed with the performance of the X30 Compactor attachment – “the quick hitch mounted rotatable compactor allows the pipe bedding material to be poured around the pipe and compacted ensuring exceptional bedding for the laid pipe”.

Our patented compaction system, brings a consistency and reliability to the bedding and compaction process. The quality of the installation afforded by the system provides a much higher level of assurance for both the Client and the Contractor.
6-1
2
7
13-1-scaled
The Clancy Group’s welcoming approach to innovation and adoption of new technologies afforded us the opportunity to put the system to work in a tough environment, working with a range of pipes and trench depths. The subsequent endorsements and fulsome praise of the system, is further confirmation that The PipeMac system represents a forever change in how gravity pipes will be laid in the future.

Delivering through innovation with The PipeMac

Manufactured in Ireland and available for delivery, worldwide. Enquire now!
Facebook-f Twitter Youtube Linkedin-in

Quick Links

Contact

Copyright © 2024 The Pipemac. All Rights Reserved
  • Privacy Policy
  • Terms of Use

The PipeBot

Specification and Operation

  • Controlled from the lead excavator cab, a radio controlled PipeBot travels within the pipe with two cameras and a pipe laser target on board. The cameras are linked to a viewing monitor mounted in the lead excavator cab.
  • The front PipeBot camera views the incoming pipe to be connected to ensure correct alignment prior to connection and also monitors the connectionduring and after the process, to verify a complete and correct joint has been achieved.
  • Once the pipe to pipe connection has been made, the excavator driver travels the robot up to the near end / socket end of the pipe and deploys the rear camera to view the pipe laser target and can then adjust the end of the pipe so as the laser beam is centred on the crosshairs.
  • The PipeBot can be placed in and removed from the pipe by means of a small attachment to the end of the PipeHandler pipe carrying beam
  • PipeBot battery life is 72 hours

The Compactor Attachment

Specification and Operation

  • Compatible with excavators from 13 to 20 Tonne.
  • Hydraulically powered reciprocating pole compactor to simultaneously compact pipe bedding and side fill shingle with a one | minute pass each side of the pipe.
  • No bedding required beneath the pipe before connection, all shingle is poured after the pipe has been connected and aligned with the pipe laser by thelead excavator - the compactor will do the rest, forcing the placed shingle underneath the pipe to form a fully compacted bed while simultaneously compacting the side fill zone. Compaction density of 95% is assured.
  • Simple two hydraulic hose quick release coupler connection to the excavator breaker circuit.
  • If required, twin compactor pole adaptor available to facilitate simultaneous compaction about both sides of smaller/ lighter pipes.

The Pipe Hander Attachment

Specification and Operation

  • Compatible with excavators from 18 to 30 Tonne.
  • Simple connection — Top Frame fits to standard Quick Hitches
  • Pipe carrying beam with a SWL 2200 kg allowing it to carry concrete pipes from DN300 to DN 900.
  • Pipe Carrying Beam handles clay and plastic pipe from DN 150 to DN 900 up to 3 m long.
  • Pipe to pipe connection with push-home Polyurethane wear pad ensuring damage free installation of pipes during the connection process.
  • Polyurethane wear pads to protect the inner surface of the pipes.